Phone: +420 724 168 471

E-mail: info@evertile.net

FAQ

Evertile is a metal sheet roof covering. What noise does it make during the rain?

Rain noise reduction is one of the exceptional features of all Evertile roof coverings that have the stone granulate surface. Along with the profile and small size of the sheets, the acrylic layered coating and the stone granulate coating prevent the typical "drumming" of the drops during the rain as well as resonance during the wind. The resulting effect will be that you won´t recognize by the noise if you have a roof made of concrete or Evertile.

Does the moss catch on the granulate?

The capturing of impurities and the growth of algae, moss and lichen is comparable to other types of rough surface coverings. Evertile adds fungicidal and algicidal ingredients to the top layer to help keep the roof surface clean from moss for about 7 to 10 years according to local conditions. It is recommended to clean the surface with a biocidal solution (e.g. Ethernal Mold Remover), at least once every 2-3 years, or whenever lichen appears on the roof in addition to moss. For cleaning do not use a high powered pressure washer (WAP), mechanical substances neither biological impurity removers containing acids and salts. All of these procedures invalidate the extended Evertile warranty. When applying the biocidal solution, follow the manufacturer's instructions and do not step on the roof covering. If the building is located under the trees or in a damp shady place, we recommend to choose a smooth surface covering - Evertech 2K or Everglaze.

What is the lifetime and warranty of EVERTILE?

The capturing of impurities and the growth of algae, moss and lichen is comparable to other types of rough surface coverings. Evertile adds fungicidal and algicidal ingredients to the top layer to help keep the roof surface clean from moss for about 7 to 10 years according to local conditions. It is recommended to clean the surface with a biocidal solution (e.g. Ethernal Mold Remover), at least once every 2-3 years, or whenever lichen appears on the roof in addition to moss. For cleaning do not use a high powered pressure washer (WAP), mechanical substances neither biological impurity removers containing acids and salts. All of these procedures invalidate the extended Evertile warranty. When applying the biocidal solution, follow the manufacturer's instructions and do not step on the roof covering. If the building is located under the trees or in a damp shady place, we recommend to choose a smooth surface covering - Evertech or Everglaze.

What is the System warranty?

The System warranty is a part of the Evertile Extended Warranty. A system warranty can be obtained by those who have registered the extended warranty and have their roof made with all the recommended original accessories. The system warranty extends the waterproofing warranty period and also allows you to obtain a surface warranty under the Evertile warranty conditions. The system warranty is not valid if the original Evertile accessories are replaced by products from other manufacturers or made from flat sheets (except for atypical details) or if there are missing recommended technical elements on the roof (ventilation elements, walkway grids, etc.).

Is it possible to walk on the Evertile roof covering?

For a safe movement on the roof, for servicing antennas or solar panels, or for cleaning chimneys, there are foot steps and walkway grids available, which have to be built into the Evertile roof panels during the installation, already. Walking on the laid roof covering can cause its deformation of the panels and damage on the surface finish.

Is a special equipment required for installation?

Evertile roof covering should not be shortened with circular saw or grinder, which burns the layer of corrosion protection of the steel sheet. Scissors for sheet metal (mechanical or electric) have to be used for cutting the Evertile panels. Evertile sells a mechanical extension ("Turbo scissors") for electric drill that can easily and quickly cut the panels. The Evertile panels can be fixed with stainless screw-nails using a pneumatic nailer or with stainless screws SCR TX-25 and an AKU drill. The rest consists of the usual plumber's equipment.

Where can I buy Evertile roof covering?

Send your inquiry to Evertile International. We will process the material calculation, consultations, and we will provide the distributor contact according to your site location. We are still looking for new distributors and official representatives and importers in some countries. In such cases we can deliver individual projects directly from our plant. .